Shenzhen ATFU Electronics Technology ltd
Shenzhen ATFU Electronics Technology LTD
Add to Cart
Description
The SN74HC245PWR is an octal Bus Transceiver with 3-state outputs and designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. The devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.
Feature
High-current 3-state outputs drive bus lines directly or up to 15 LSTTL loads
80µA maximum ICC low power consumption
12ns typical Propagation delay (tpd)
±6mA Output drive at 5V
1µA maximum Low input current
Green product and no Sb/Br
Applications
Industrial, Automation & Process Control, Signal Processing, Communications & Networking
Transceiver, Non Inverting Buffers, Transceivers & Line Drivers; Transceiver, Non Inverting TEXAS INSTRUMENTS Buffers, Transceivers & Line Drivers; 74HC245 Buffers, Transceivers & Line Drivers; 74HC245 TEXAS INSTRUMENTS Buffers, Transceivers & Line Drivers; TEXAS INSTRUMENTS Buffers, Transceivers & Line Drivers; 74HC245 Transceiver, Non Inverting Buffers, Transceivers & Line Drivers